fabric expansion joints
Fabric expansion joints are suited for gaseous media, such as air, exhaust gases and solvent fumes, as well as for operation below dew point (also involving substances with certain concentration of acids), also with abrasive enriched gases (e.g. coal or cement dust).
Due to their modular design, fabric expansion joints adjust especially well to different requirements (e.g. critical sealing requirements, frequent temperature and pressure variations), and therefore, cover a very wide spectrum of applications.
The high quality materials as well as the technical experience in designing and manufacturing assure the long life and durability of DEKOMTE fabric expansion joints.
![Belt Expansion Joint 1G](/wp-content/uploads/2020/12/1G-76f97906.png)
1
Applications: Standard application flat band joint suitable for ventilation...![Flange Expansion Joint 2UG](/wp-content/uploads/2020/12/2UG-32cfb034.png)
2U
Applications: Universal application for increased tightness requirements at....![Belt Expansion Joint 10G](/wp-content/uploads/2021/03/2UG-32cfb034-01.jpg)
10
Applications: Suitable as an exhaust expansion joint design for applications...![Expansion Joint 3WA With Pre-Formed Convolution](/wp-content/uploads/2020/12/3WA-1-de56dafd.png)
3W
Applications: Long life time at dynamic temperature loads in gas turbine plants...![Membrane Expansion Joint ME](/wp-content/uploads/2020/12/ME-976327ca.png)
ME
Applications: Acceptance of higher movements at very high temperatures...Fabric Expansion Joints
DEKOMTE supplies quality fabric expansion joints, made from many different materials. In principle, fabric expansion joints are best for gaseous media, such as air, exhaust gas and solvent fumes, particularly for operation below the dew point, in acidic environments, or for abrasive exhaust gases (e.g. containing coal dust).
Fabric expansion joints are often multi-layer systems, consisting of:
- Temperature and corrosion-resistant insulating fabrics
- Gas impermeable films, including:
- Foils – stainless, aluminium or Inconel
- PTFE and composites
- Silicone and rubber
- UV and water resistant materials for external protection
Part of the construction must also consider the supporting mechanical layers to give strength for maintaining the shape and resist pressure (normally internally, but also under negative pressure).
Repairs & Maintenance
An advantage of fabric expansion joints is the ability to patch, repair and replace in sections, thus minimising the downtime or outage. DEKOMTE service approach gives reliable technical advice on what can be repaired and what must be replaced. Considerations to be taken are:
- Damage can be repaired in spot cases to bridge to the next scheduled outage
- Cold-casing application joints can be repaired with low risk and good reliability
- Reliability of repairs can be difficult to achieve in high temperature applications
When an inspection is made, the fabric replacement can be planned to coincide with outage schedules. The upgrading of materials, composition, fixing systems or internal parts can give an important impact on longer life and more durable expansion joints.
A thorough evaluation of the adjacent ducting is required to minimise modification to the duct or steel parts.
![](https://www.dekomte.com/wp-content/uploads/2020/12/Dekomte-Manufactoring-Products-37-of-220-scaled-1-1024x683.jpg)
![Dekome FJ](https://www.dekomte.com/wp-content/uploads/2020/12/Untitled-design-3-1024x683.jpg)
The overall form and shape of the joint is designed and constructed solely for the allowable movements required. Caution should be taken in any additional movement flexibility outside the specified movement criteria.
Movements
Axial Movement Compression
![axial movement](https://www.dekomte.com/wp-content/uploads/2020/12/Movement-Compress-768x768.jpg)
Axial Movement Extension
![Axial Movement extension](https://www.dekomte.com/wp-content/uploads/2020/12/Movement-Extend-1024x1024.jpg)
Lateral Movement
![Movement-Lateral](https://www.dekomte.com/wp-content/uploads/2020/12/Movement-Lateral-1024x1024.jpg)
Angular Movement
![](https://www.dekomte.com/wp-content/uploads/2020/12/Movement-Angular-1024x1024.jpg)
QUALITY.
ASSURED.
![Dekomte Accreditations](https://www.dekomte.com/wp-content/uploads/2023/01/Untitled-design-2.png)
![Dekomte Expansion Joint Technology](https://www.dekomte.com/wp-content/uploads/2021/01/Copy-of-Untitled-3-1024x628.jpg)
Make contact today to help you choose the right solution
24/7, 365 day support for all your inspection, assessment or installation requirements.